天津11选5走势图

山东优泉保温建材有限公司
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:
当前位置:首页 - 新闻动态
新闻动态
挤塑板的各种用途分析!
作者:admin 来源:本站 发布时间:2019-07-11 11:33:28 浏览次数:34
  1. 广泛用于墙体保温、平面混凝土屋面及钢屋面保温;
1. Widely used for wall insulation, flat concrete roof and steel roof insulation;
2. 用于低温贮存场地、停车场、机场跑道、高速公路等领域的防潮保温。
2. Used for low temperature storage sites, parking lots, Airport runways, highways and other fields of moisture insulation.
基于聚苯乙烯挤塑板与聚合物树脂烹饪同时注入催化剂,然后挤压和闭孔泡沫的连续性刚性泡沫塑料板,其内部结构独立封闭的泡沫,是一种高压力、低吸水率、水分、透气,重量轻、耐腐蚀、抗老化,长期使用几乎没有老化),导热系数低,环保保温材料性能优异。
Based on polystyrene extruded plate and polymer resin cooking, simultaneously injected into the catalyst, and then extruded and closed cell foam continuous rigid foam board, its internal structure is independently closed foam, is a kind of high pressure, low water absorption, moisture, breathability, light weight, corrosion resistance, anti-aging, almost no aging in long term use, heat conduction system. Low number, excellent performance of environmental protection insulation materials.
挤塑板广泛应用于干壁保温、混凝土平面屋顶及钢结构屋顶保温、冷藏、低温地板辐射采暖地板采暖管、停车平台、机场跑道、高速公路等领域的防潮绝缘、地面冻胀控制,是建设廉价和微妙的绝缘质量,防潮材料。
Extruded board is widely used in dry wall insulation, concrete flat roof and steel structure roof insulation, refrigeration, low-temperature floor radiation heating floor heating pipe, parking platform, Airport runway, Expressway and other fields of moisture insulation, ground frost heave control, is a cheap and delicate insulation quality, moisture-proof material.
具有优良、耐用的隔热性能

Excellent and durable heat insulation performance

尽可能低的导热系数是所有保温材料的目标。挤塑板主要由聚苯乙烯制成,聚苯乙烯原本是一种导热性较低的优良原料。与挤出挤出相结合,紧密的蜂窝状结构更有效地防止了导热,聚合物板的导热系数为0.028/m。K具有热阻高、线性膨胀率低等特点。导热系数远远低于其他绝缘材料。如EPS板、发泡聚氨酯、保温砂浆、珍珠岩等。
The lowest thermal conductivity is the goal of all thermal insulation materials. The extruded board is mainly made of polystyrene, which is a good raw material with low thermal conductivity. Combined with extrusion, the compact honeycomb structure prevents heat conduction more effectively, and the thermal conductivity of polymer plate is 0.028/m. K has the characteristics of high thermal resistance and low linear expansion rate. The thermal conductivity is much lower than that of other insulating materials. Such as EPS board, foamed polyurethane, thermal insulation mortar, perlite and so on.
二、优越的耐水性、防潮性
2. Superior water resistance and moisture resistance
挤塑板具有紧密紧密的孔隙结构,聚苯乙烯分子结构本身不吸水,板的两侧没有空隙,所以吸水率很低,防潮防渗性能优异。
The extruded board has compact pore structure, polystyrene molecular structure itself does not absorb water, and there are no voids on both sides of the board, so the water absorption rate is very low, moisture-proof and seepage-proof performance is excellent.
三、耐腐蚀、耐用
3. Corrosion resistance and durability
一般硬质泡沫保温材料使用几年后易老化,随之导致吸水性能下降。挤塑板具有优异的耐腐蚀、耐老化和保温性能,在高蒸汽压力下仍能保持优异的性能,使用寿命可达30-40年。
Generally, rigid foam insulation materials are easy to be aged after several years, resulting in a decrease in water absorption. The extruded sheet has excellent corrosion resistance, aging resistance and heat preservation performance, and can maintain excellent performance under high steam pressure. Its service life can reach 30-40 years.
以上是济南挤塑板厂家整理后主要使用的挤塑板,详情可点击官方网站咨询:
These are the main extrusion boards used by Jinan Extrusion board manufacturers after finishing. For details, please click on the official website for consultation: .
友情链接:博九娱乐网  博九娱乐网  传奇彩票官网  博九彩票  幸运彩票  幸运彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!