天津11选5走势图

山东优泉保温建材有限公司
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:
当前位置:首页 - 新闻动态
新闻动态
挤塑板是一种轻质高强度板材!
作者:admin 来源:本站 发布时间:2019-06-27 10:13:59 浏览次数:150
  XPS挤塑板具有高强度的特点。XPS挤塑板是一种轻质高强度板、挤塑板的特殊工艺连续挤出发泡成型材料,形式的硬膜外表面均匀平整,内部闭孔泡沫不断甚至完全成蜂窝状结构,因此具有较高的压力,重量轻,不吸水,密封耐磨、不退化特征,与EPS聚苯乙烯泡沫塑料板相比,其强度、保温,水蒸汽渗透阻力性能有了很大提高。在浸水条件下,能完全保持其保温和抗压强度,特别适用于建筑物的保温、保温和防潮处理。它是当今建筑业中价廉物美的建筑材料之一。
XPS extruded sheet has high strength. XPS extruded sheet is a special continuous extrusion foaming material for lightweight high-strength panels and extruded panels. The form of the epidural surface is even and smooth, and the inner closed cell foam is even honeycomb structure. Therefore, it has high pressure, light weight, no water absorption, sealing resistance to wear and no degradation. Compared with EPS polystyrene foam board, its strength, heat preservation and water vapor permeability resistance The performance has been greatly improved. Under the condition of immersion, it can completely maintain its heat preservation and compressive strength, especially suitable for building heat preservation, heat preservation and moisture protection treatment. It is one of the low-cost and high-quality building materials in today's construction industry.
无与伦比的保温性能导热系数小于或等于0.028w/mk,远远低于其他保温材料,因此具有热阻高、线性膨胀率低的特点。广泛应用于屋面保温系统、冷库、墙体内外保温,效果无与伦比。
Incomparable thermal insulation performance thermal conductivity is less than or equal to 0.028w/mk, far lower than other insulation materials, so it has the characteristics of high thermal resistance and low linear expansion rate. Widely used in roof insulation system, cold storage, wall internal and external insulation, the effect is incomparable.
比没有水分吸收剂作为一个完美的保温材料,吸水率是非常重要的技术指标,吸水率会导致高隔热性能,挤塑板完全封闭的孔隙结构,板缺口的利弊,使水、冷凝和冻结/解冻周期,等等等等的水分,所以可以有效地防止水分子的进入,因此不能使板材在老化,由于保温层在很长一段时间内会失去其作用,造成进一步的保温层应进行改造。挤压板的闭孔结构可以有效地防止水分子(包括水蒸气)的渗透。即使在施工过程中发生机械损伤,挤塑板紧密填充的蜂窝状结构也能有效地保持低吸水性能。由于有效地防止了水分子的渗透和非亲水性,老化几乎是不可能的,几乎与建筑物的寿命相同。

As a perfect insulation material, water absorption is a very important technical index. Water absorption will lead to high thermal insulation performance, completely closed pore structure of extruded board, advantages and disadvantages of plate gap, water, condensation and freezing/thawing cycle, etc., so water molecules can be effectively prevented from entering, so the board can not be aged because the insulation layer is very long. It will lose its function for a period of time, which will result in further modification of the thermal insulation layer. The closed-cell structure of the extrusion plate can effectively prevent the penetration of water molecules (including water vapor). Even if mechanical damage occurs during construction, the honeycomb-like structure closely filled with extruded sheets can effectively maintain low water absorption. Because water molecules are effectively prevented from penetrating and non-hydrophilic, aging is almost impossible, almost the same as the life of buildings.

优秀的和持久的保温性能低导热系数的条件都应该有保温材料,挤塑板是由聚苯乙烯为原料,众所周知,聚苯乙烯本身是一个优秀的保温材料,加上挤压模式生产,紧张的闭孔蜂窝polylens更有效防止热传导。
Excellent and lasting thermal insulation performance and low thermal conductivity conditions should have thermal insulation materials, Extrusion board is made of polystyrene as raw materials, as we all know, polystyrene itself is an excellent thermal insulation material, plus extrusion mode production, tight closed-cell POLYLENS more effective to prevent heat conduction.
XPS挤塑板材是一种轻质高强板材,密度不超过40kg / m3,抗压强度大于350KPa。在建筑物中使用时,可获得良好的抗冲击性。XPS挤塑板优异的压缩性能即使在水中浸泡也几乎没有改变,这一特点在其他保温材料中是没有的。
XPS extruded sheet is a kind of light weight and high strength sheet with a density not exceeding 40 kg/m3 and a compressive strength greater than 350 KPa. When used in buildings, good impact resistance can be obtained. The excellent compressive properties of XPS extruded sheet hardly change even when it is immersed in water, which is not found in other thermal insulation materials.
良好的阻燃性能可根据用户的要求提供普通及阻燃产品,可完全满足厂房、体育场、展览中心等绝缘产品的阻燃性能要求,高品质的环保产品。
Good flame-retardant performance can provide ordinary and flame-retardant products according to user's requirements. It can fully meet the flame-retardant performance requirements of insulation products such as factory buildings, stadiums, exhibition centers and other high-quality environmental protection products.
以上内容由济南挤塑板厂家整理发布,更多相关信息可以点击我们的官网进行咨询:
More inion can be obtained by clicking on our official website: .
友情链接:博九娱乐网  大无限彩票  传奇彩票  传奇彩票  博九彩票  传奇彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!